Investigation of the grinding temperature and energy partition during cylindrical grinding

In this study, the distribution of temperature and energy under the process parameter conditions and thermal physical parameters are investigated using a physics-based model via the finite element modeling (FEM) simulation and experimental validation during cylindrical grinding. A cylindrical grinding model is modeled to simulate the chip removal behavior in the grinding process and to measure the workpiece and chip temperatures by refining the temperature field. Workpiece speed affects the energy partition into chip more obviously than other grinding parameters. Reasonable selection of grinding parameters greatly reduces the energy partition into the workpiece from 80% to 50–30% or even lower. This study offers a comprehensive understanding of heating mechanisms during grinding and thus is very beneficial for process optimization.     

Effects of friction-stir processing with water cooling on the properties of an Al–Zn–Mg–Cu Alloy

An Al–Zn–Mg–Cu (Al-7B04) aluminium alloy in two conditions, i.e. with an artificial aging (7B04-AA) temper and with an annealing (7B04-O) temper, was friction-stir processed using water cooling, and the microstructure and the mechanical properties of the stir zone (SZ) were investigated. Compared with the samples subjected to air cooling, the SZs of water-cooled samples were strengthened, and the degree of strengthening depended on the initial base metal temper. For friction-stir-processed material after an 7B04-O temper, the efficiency of strengthening was relatively high due not only to the refinement of grains and strengthening precipitates but also due to the high solution level in the SZ. In contrast, the slight strengthening of friction-stir-processed 7B04-AA resulted solely from grain refinement.     

Scalable fabrication of novel SiC nanowire nonwoven fabric

Flexible papers constructed by one-dimensional nanowires have attracted much attention due to their various applications. Herein, a novel nonwoven fabric with paper-like qualities composed of zinc blende SiC (β-SiC) nanowires was fabricated by a scalable rolling process. The SiC nanowires were synthesized by the carbothermal reduction reaction of the carbon fiber and carbonaceous silica xerogel. The crystal phase, morphology and microscopic structure of the as-prepared SiC nanowires were characterized by field emission scanning electron microscope, X-ray diffraction and high-resolution transmission electron microscopy. The nanowire vapor–solid growth mechanism and preparation process for SiC nanowire nonwoven fabric were also discussed. The freestanding SiC nanowire nonwoven fabric exhibited high flexibility, high mechanical strength, excellent refractory performance and thermal stability. With high flexibility, high mechanical strength, superior nonflammability and thermal stability, the flexible paper-like 3C-SiC nanowire nonwoven fabric materials would be expected to have some potential applications, such as ceramic matrix composites, metal matrix composites, energy storage, catalyst supports, radiation-proof fabric, filtration and separation.     

基于介形类生态特征评价湖南某铀矿山地表水放射性环境

湖南某铀矿为我国一重要铀资源生产基地，长年的矿冶活动使该铀矿冶地域生态环境不可避免地遭到了一定程度破坏。本文以该铀矿冶地域介形类为研究对象，分析其分布与生态特征，并利用该生物评价本矿冶地域地表水放射性污染状况。结果表明，Cypridopsis vidua在溪流与河流中均有分布，Helerocypris incongruens仅发现于河流，两者丰度均不高。利用该两种介形类丰度及总丰度变化可指示水体铀浓度的变化，丰度越小，铀含量越大，反之亦然。Shannon-Wiener物种多样性指数与水体铀浓度呈明显负相关，表明也可利用介形类生物指数指示水体铀浓度。该生物指数明显偏低，说明该铀矿冶地域地表水环境质量需要改善，放射性污染应引起足够重视。     

内蒙古某含银铅锌矿工艺矿物学研究

内蒙古某含银铅锌矿主要含有铅、锌、银、铜、硫等有价元素,对该矿进行系统的工艺矿物学研究,查明矿石的矿物组成、结构与构造,目的矿物的嵌布特征、嵌布粒度、赋存状态等,为制定选矿工艺流程提供矿物学依据。     

Structure variation and energy storage properties of acceptor-modified PBLZST antiferroelectric ceramics

Energy storage capacitors with high recoverable energy density and efficiency are greatly desired in pulse power system. In this study, the energy density and efficiency were enhanced in Mn-modified (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃ antiferroelectric ceramics via a conventional solid-state reaction process. The improvement was attributed to the change in the antiferroelectric-to-ferroelectric phase transition electric field (E_F) and the ferroelectric-to-antiferroelectric phase transition electric field (E_A) with a small Mn addition. Mn ions as acceptors, which gave rise to the structure variation, significantly influenced the microstructures, dielectric properties and energy storage performance of the antiferroelectric ceramics. A maximum recoverable energy density of 2.64 J/cm³ with an efficiency of 73% was achieved when x = 0.005, which was 40% higher than that (1.84 J/cm³, 68%) of the pure ceramic counterparts. The results demonstrate that the acceptor modification is an effective way to improve the energy storage density and efficiency of antiferroelectric ceramics by inducing a structure variation and the (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃-xMn₂O₃ antiferroelectric ceramics are a promising energy storage material with high-power density.     

高光谱激光雷达谱位合一的角度效应分析

高光谱激光雷达以其谱位合一的技术优势为实现超三维精准遥感观测提供了可行途径,因此成为当前激光雷达与高光谱遥感领域共同大力推进的前沿发展方向。目前已有多型原型系统研发出来并得到了原理性验证,然而针对其数据处理核心环节问题的基础技术仍较为欠缺。典型问题之一是不同波段回波信号受激光入射角度的影响,该角度效应限制了高光谱激光雷达实现高性能遥感。以芬兰空间信息研究所高光谱激光雷达原型系统扫描桦树树干为例探讨了该角度效应,发现了不同激光波段对不同入射角度的回波强度响应模式,推导出了角度效应的基本规律及其精细尺度的统计规律,为后续该方向的系统研发、数据处理及信息提取等提供了可借鉴的底层机理与技术基础。     

不同类型断层控制油气垂向富集的差异——以渤海湾盆地歧口凹陷歧南斜坡区为例

渤海湾盆地历经多期构造变动，断层圈闭发育普遍。断层作为断层圈闭的边界条件，在油气成藏过程中起着至关重要的作用。以断层圈闭较发育的歧南斜坡区为例分析了同向断层和反向断层控制油气垂向富集的差异，基于三维地震资料，从断层形成过程和断层圈闭分布出发，剖析了断层遮挡圈闭的成因及分布规律。结合油水分布规律，基于油藏解剖并应用储层定量荧光技术明确了不同类型断层控藏的差异及其形成机理。研究表明：①断层分段生长作用和断层上盘与下盘的差异活动是同向断层控制下断层遮挡圈闭形成的主要原因，斜坡区反向断层控制形成的断层圈闭则是断块掀斜翘倾作用所致；②同向断层圈闭发育在断层上盘分段点位置，只有当同向断层进入"硬连接"阶段方可形成断层圈闭，反向断层圈闭形成在断层下盘，在反向断层活动初期便可形成；③同向断层既可以控制油气在多套含油气系统中聚集成藏，也可在一套含油气系统中富集，而反向断层往往控制油气在一套含油气系统中富集；④不同类型断层控制油气垂向聚集的差异与圈闭发育位置以及断-盖配置有关。采用泥岩涂抹系数对沙河街组一段中部盖层控制的含油气系统的垂向调整进行定量评价，泥岩涂抹系数低于3.5时油气保存，泥岩涂抹系数高于3.5时油气垂向渗漏。